Legal descriptions identify exactly where a property's boundaries are, and the exam tests both the systems and the acreage math. This guide covers why street addresses aren't enough, metes and bounds, the rectangular (government) survey system, section numbering, fractional acreage calculations, the lot and block method, and vertical descriptions using datums and benchmarks – with practice questions at the end.
The three U.S. legal description methods are metes and bounds (distances and directions from a point of beginning), the rectangular survey system (townships of 36 one-square-mile sections of 640 acres) and lot and block (recorded plat maps). To find acreage, multiply the denominators and divide 640 by the result.
Table of Contents
- Purpose of Legal Descriptions
- The Metes and Bounds Method
- The Rectangular Survey System (Townships & Sections)
- Acreage Math Calculations in the Government Survey
- Recorded Plat Method (Lot and Block)
- Describing Vertical Elevation (Datums & Benchmarks)
- Key Exam Takeaways
- Practice Questions
- Frequently Asked Questions
Purpose of Legal Descriptions
Every parcel of real estate is unique, permanently fixed to the earth, and non-fungible. While street addresses (such as "100 Elm Street") and tax parcel numbers are convenient for daily postal delivery and property tax billing, they are legally insufficient to convey real estate in a deed or mortgage.
A street address lacks permanence—street names can be changed by city councils, building numbers can be re-indexed, and addresses fail to identify the exact geographic boundaries, acreage, and corners of a tract. A legal description is one that provides sufficient mathematical and geometric data for a licensed surveyor to locate the parcel and accurately map its exact boundaries on the surface of the earth.
Three primary systems of legal description are recognized in the United States:
| Survey Method | Core Mechanism | Primary Geographic Region |
|---|---|---|
| Metes and Bounds | Measures distances (metes) and compass directions (bounds) starting from a defined Point of Beginning (POB) around an enclosed perimeter. | Original 13 Eastern colonies, Maine, Vermont, Kentucky, Tennessee, Texas, and irregularly shaped parcels nationwide. |
| Rectangular Survey System (Government Survey) |
Standardized federal grid system based on intersecting Principal Meridians (north-south) and Base Lines (east-west), creating 6-mile-square townships. | 30 Midwestern, Southern, and Western public-land states surveyed under federal public domain acts. |
| Recorded Plat Method (Lot and Block System) |
Subdivides surveyed blocks into numbered lots on an approved plat map recorded in county land records. | Urban, suburban, and commercial subdivisions nationwide. |
The Metes and Bounds Method
The oldest surveying method in the United States is Metes and Bounds. The term "metes" refers to distance measurements (measured in feet, rods, or chains), while "bounds" refers to compass bearing directions and terminal reference markers known as monuments.
The Point of Beginning (POB) Rule
Every metes and bounds survey begins at a permanent, identifiable landmark known as the Point of Beginning (POB). The description traces the parcel boundary in a designated clockwise or counterclockwise direction from monument to monument, recording precise compass angles (e.g., "North 45 degrees 30 minutes East, 250 feet") until it finally returns to the Point of Beginning.
A metes and bounds legal description MUST close back to the Point of Beginning! If the surveyor's description fails to return to the POB, the tract does not form an enclosed polygon, making the legal description defective.
The Rectangular Survey System (Townships & Sections)
Established by the Continental Congress under the Land Ordinance of 1785, the Rectangular Survey System (or Public Land Survey System - PLSS) was designed to replace inaccurate colonial landmark descriptions with an objective, standardized rectangular grid.
Grid Architecture: Meridians, Base Lines, Ranges & Tiers
- Principal Meridians: Primary surveyed north-south reference lines of longitude (37 named principal meridians exist in the US system).
- Base Lines: Primary surveyed east-west reference lines of latitude intersecting the principal meridian at an initial benchmark point.
- Range Lines: North-south lines running parallel to the Principal Meridian at 6-mile intervals. The 6-mile-wide vertical strips between range lines are called Ranges (numbered East or West of the Principal Meridian, e.g., Range 1 East / R1E, Range 2 West / R2W).
- Township Lines (Tier Lines): East-west lines running parallel to the Base Line at 6-mile intervals. The 6-mile-wide horizontal strips are called Township Tiers (numbered North or South of the Base Line, e.g., Township 1 North / T1N, Township 3 South / T3S).
- Township: The 6-mile by 6-mile square grid formed by the intersection of two range lines and two township lines.
- Area of a Township = 36 square miles (23,040 acres).
- Perimeter of a Township = 24 linear miles.
The 36 Sections of a Township
Every township is subdivided into 36 Sections. Each section is a square measuring 1 mile on each side, containing exactly 640 acres (1 square mile).
On state real estate exams, section numbering questions appear frequently! Section 1 is ALWAYS in the Northeast (NE) corner. The numbers progress west across the top row from 1 to 6, drop down to Section 7, snake eastward to Section 12, drop down to Section 13, and continue snaking back and forth, ending with Section 36 in the Southeast (SE) corner.
Historical Exam Fact: Section 16 was traditionally reserved by federal law to generate revenue for public school education.
Acreage Math Calculations in the Government Survey
Real estate licensing examinations frequently require candidates to calculate the total acreage of a property described by fractional section quarters. A standard section contains 640 acres.
The Universal Denominator Formula
To calculate the acreage of any fractional description, follow these two foolproof steps:
- Multiply all the denominators in the fractional legal description together.
- Divide 640 by that total product.
| Legal Description | Denominator Multiplication | Acreage Calculation |
|---|---|---|
| The NW ¼ of Section 14 | Denominator = 4 | 640 ÷ 4 = 160 acres |
| The S ½ of the NW ¼ of Section 14 | 2 × 4 = 8 | 640 ÷ 8 = 80 acres |
| The NE ¼ of the SW ¼ of the SE ¼ of Section 14 | 4 × 4 × 4 = 64 | 640 ÷ 64 = 10 acres |
| The W ½ of the NE ¼ of the NW ¼ of the SW ¼ | 2 × 4 × 4 × 4 = 128 | 640 ÷ 128 = 5 acres |
Whenever you see the word "AND" in a rectangular survey math problem, it signals that you are dealing with TWO SEPARATE PARCELS that must be calculated individually and added together!
Problem: Calculate the acreage of: "The N ½ of the SW ¼ AND the SE ¼ of Section 22."
• Parcel 1: 640 ÷ (2 × 4) = 640 ÷ 8 = 80 acres.
• Parcel 2: 640 ÷ 4 = 160 acres.
• Total Combined Acreage = 80 + 160 = 240 acres.
Recorded Plat Method (Lot and Block)
The Recorded Plat System (or Lot and Block System) is used primarily in developed urban and suburban residential subdivisions. A real estate developer purchases a large tract of land, surveys it using metes and bounds or the rectangular survey system, and subdivides it into numbered lots and blocks.
The developer files an engineered Subdivision Plat Map with the county recorder of deeds. Once officially approved and recorded, individual properties can be conveyed using a concise, legally binding description:
"Lot 12, Block 4 of Oakwood Estates Subdivision, being a part of the Southeast Quarter of Section 18, Township 4 North, Range 2 West of the Sixth Principal Meridian, County of Johnson, State of Kansas."
Describing Vertical Elevation (Datums & Benchmarks)
Standard land surveys measure two-dimensional surface horizontal boundaries. However, legal descriptions are also required for properties located above or below the surface of the earth—such as condominium airspace units, mineral shafts, and subway transit tunnels. Vertical descriptions require measuring elevation:
| Vertical Survey Term | Legal Definition & Practical Function |
|---|---|
| Datum | A standardized horizontal reference plane from which elevations are officially measured. Many textbooks describe the datum as mean sea level (historically measured at New York Harbor). Today the official U.S. vertical datum is NAVD 88, maintained by the National Geodetic Survey. |
| Benchmark | A permanent, official reference point embedded in bronze or iron markers set into solid bedrock or concrete, stamped with its precise elevation above or below the official datum. Surveyors use local benchmarks to calculate the ceiling and floor boundaries of condominium airspace. |
Key Exam Takeaways
Memorize these foundational real estate survey numbers and rules for exam day:
- Acreage Conversion: 1 Acre = 43,560 square feet. (Memory trick: "4 old ladies driving 35 in a 60 mph zone: 4-3-5-6-0").
- Section Dimensions: 1 Section = 1 square mile = 640 acres = 5,280 linear feet on each side.
- Township Dimensions: 1 Township = 6 miles by 6 miles = 36 square miles = 36 sections = 24 miles perimeter.
- Township Numbering: Section 1 is Northeast; Section 6 is Northwest; Section 31 is Southwest; Section 36 is Southeast. (Snakes back and forth).
- Metes and Bounds Requirement: Must have an identifiable Point of Beginning (POB) and must completely close back to the POB.
- Fractional Section Math: Multiply denominators together, then divide 640 by the product. If "AND" connects descriptions, calculate each parcel separately and add them together.
- Datums and Benchmarks: Datums are reference planes (mean sea level); benchmarks are permanent bronze markers stamped with local elevation.
Legal Descriptions Practice Questions
Test yourself with these exam-style questions. Choose your answer, then open the explanation.
1. How many acres are in the NE ¼ of the SW ¼ of a section?
- A. 10
- B. 40
- C. 80
- D. 160
Show answer
Answer: B. 640 ÷ (4 × 4) = 640 ÷ 16 = 40 acres.
2. A township contains how many sections?
- A. 6
- B. 24
- C. 36
- D. 640
Show answer
Answer: C. A township is 6 miles × 6 miles = 36 sections.
3. Which method describes land as "Lot 7, Block 2" of a recorded subdivision?
- A. Metes and bounds
- B. Rectangular survey
- C. Lot and block
- D. Monument
Show answer
Answer: C. The recorded plat (lot and block) method uses lot and block numbers from a filed plat map.
4. How many acres are in the N ½ of the NW ¼ AND the SE ¼ of a section?
- A. 80
- B. 160
- C. 240
- D. 320
Show answer
Answer: C. 80 acres + 160 acres = 240 acres. "AND" means add two parcels.
5. In a township, Section 6 is in the:
- A. Northeast corner
- B. Northwest corner
- C. Southwest corner
- D. Southeast corner
Show answer
Answer: B. Sections run 1 to 6 across the top from east to west, so Section 6 is in the northwest corner.
Frequently Asked Questions
Why isn't a street address a legal description?
Addresses can change and don't show the exact boundaries, so they're not precise enough to convey land in a deed.
How many acres are in a section?
640 acres. A section is one square mile.
Where is Section 1 in a township?
In the northeast corner. Section 36 is in the southeast corner.
What must a metes and bounds description do?
Start at a point of beginning and return to it so the boundary closes.
How many square feet are in an acre?
43,560 square feet.
Key rules on this page were checked against these sources in October 2026. Laws and fees change and vary by state, so confirm with your state's licensing agency.